HOME PAGE ABOUT US R&D OUR TEAM QUALITY CONTROL JOIN US CONTACT US
    Product Catalogue
 
Battery Management System
  Battery Charger
  Battery Isolator
  BMS
Automotive Relay
  Micro Relay
  Mini Relay
  HD Relay
  Electronic Flasher
  Thermal Flasher
Accessories
  Dual Battery Monitor
  Battery Terminal
  Battery Clip
  Connect Plug
HOME  >  PRODUCTS
Path    >     Battery Isolator
Article No.: R12140B/R24100B
 
 

Feature

1.12V,140A/24V,100A
2.Designed for dual battery system
3.Suitbale for 12V/24V charging system
4.Surge protect
5.Easy to install

Summary

1. When the engine is started and the voltage of start battery is higher than cut-in volts, the smart battery isolator (SBI) keeps engaging, two batteries (start and house)are charged simultaneously. Unit Indicator (LED) is on.

2. When the engine is stopped, the batteries no longer have a charge from the alternator, and the loads on the batteries begin to deplete them. Unit Indicator (LED) is on

3. When the voltage drops below cut-out volts for 5 seconds, the SBI senses it and disengages, separating both batteries. This can save power of your start battery from being drained by over loads on house battery. Unit Indicator (LED) is off.

4. When the vehicle is restarted, the start battery has enough power to crank the engine, and the engine is powering the alternator, when the start battery has reached the cut-in volts, the SBI engaged again. Unit Indicator (LED) is on.

Electronic Specifications

 P/N  Rating Voltage  Continuous Current  Intermittent Current  Cut in voltage Cut out voltage   Ignition Protection
 R12140B  12V  140A  170A  13.3V  12.8V  UL1107/UL1500
 R24100B  24V  100A  140A  26.6V  25.6V  UL1107/UL1500

LED Indications

On:Isolator engaged
Off:Isolator disengaged

Dimensions

6.5(L)*67.5(W)*53.5(H)mm


Wiring Diagram


 
ABOUT US    |    PRODUCTS    |    R&D    |    QUALITY CONTROL    |    CONTACT US
 浙ICP备05037095号 Copyright © 2000-2021 AOPEC. All Rights Reserved